Encadenar el VG99 junto con el GR55

Started by Wahs, June 22, 2017, 02:53:05 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Wahs

Hola a todos, hace cosa de un año que me registré en este foro, y la verdad que tuve mucha ayuda leyendo todos vuestros aportes y dudas, hoy quiero compartir una duda que me está costando encontrar solución por la web, la expongo:

Tengo un VG99 y estoy apunto de pillarme un GR55 solo por los sonidos del sinte PCM.
¿Alguien podría ayudarme a conectar ambos equipos en cadena?

La idea es conectar la Godin al VG99, utilizando sus efectos junto con la FC300 con ella, vamos, hasta ahí, como siempre, la duda viene cuando quiero incorporar el GR55 a la cadena de conexiónes para utilizar únicamente sus PCM.

De momento he utilizado el iPad conectado al Alesis Dock, para lanzar los sonidos de sinte del GarageBand, MusicStudio, SampleTank... y si puedo ayudar a alguien en este campo también aprovecho para prestar mi ayuda. Pero al ver que hay bastante retardo de señal pues opté por pillarme el GR55

Espero puedan ayudarme.

Saludos para todos y muchas gracias!

imerkat

no se puede en cadena pero si en paralelo. vas a nesecitar algo como Roland US-20 A/B/Y:
https://www.amazon.com/Roland-US-20-Selector-Floor-Pedal/dp/B003Y59PFO

Despues una manera para mesclar la señal si quieres usar el mismo amplificador

Elantric

QuoteHello everyone, I have been registered for a year in this forum, and the truth is that I had a lot of help reading all your contributions and doubts, today I want to share a doubt that is costing me to find a solution on the web, I expose it:

I have a VG99 and I'm about to get a GR55 just for the sounds of the PCM synth.
Could anyone help me connect both computers in a chain?

The idea is to connect the Godin to the VG99, using its effects along with the FC300 with it, come on, there, as always, the doubt comes when I want to incorporate the GR55 to the connection chain to use only its PCM.

So far I've used the iPad connected to the Alesis Dock, to launch the synton sounds of GarageBand, MusicStudio, SampleTank ... and if I can help someone in this field I also take the opportunity to lend my help. But to see that there is enough signal delay because I chose to catch the GR55

I hope you can help me.

Greetings to all and thank you very much!

Lamentablemente, el GR-55 no puede hacer sonidos como un módulo de tonos MIDI "desde los mensajes MIDI Nota on / off de la VG-99

La solución de menor costo es el cable Y de GKP-2


Quote
Sadly the GR-55 can not make sounds as a MIDI Tone module" from MIDI Note on/off messages from the VG-99

the lowest cost solution is the GKP-2 "Y cable
http://www.rolandus.com/products/gkp-2/



or DIY build one

https://www.vguitarforums.com/smf/index.php?topic=7869.0

Wahs

¡Muchas gracias a los dos!
Voy a ver como hago...